Seqanswers Leaderboard Ad

Collapse

Announcement

Collapse
No announcement yet.
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    yeaa i have been trying to upgrade but I am not able to. After all the commands it remains R 2.13.0.

    Comment


    • #17
      Originally posted by dishasharma35 View Post
      yeaa i have been trying to upgrade but I am not able to. After all the commands it remains R 2.13.0.
      Do you have administrator rights on this machine?

      Comment


      • #18
        I had the same problem actually. "Sudo apt-get install r-base" seemed to install an older version (in my case it was 2.14.0 I believe). A friend of mine set it up so that the following text was added to the bottom of /etc/apt/sources.list:

        ## R BACKPORTS
        deb http://cran.uib.no/bin/linux/ubuntu precise/
        You can replace the "cran.uib.no" part with the appropriate CRAN mirror (http://cran.r-project.org/mirrors.html).

        After doing this, running the same command as above installed the latest version of R, and thus also allowing an installation of cummeRbund.

        Perhaps GenoMax can confirm whether this is a correct way to go about it...

        Comment


        • #19
          yes... I did install by using the command for administrator rights. I guess main problem is the up-gradation for R

          Comment


          • #20
            Error in library(cummeRbund) : there is no package called ‘cummeRbund

            I am new to Linux (Ubuntu) and R. I have similar problem when I try to install cummeRbund. I have tried the way that cnyh used. Following are hte detailed message:

            > source("http://bioconductor.org/bioocLite.R")
            Bioconductor version 2.11 (BiocInstaller 1.8.3), ?biocLite for help
            > biocLite("cummeRbund")
            BioC_mirror: http://bioconductor.org
            Using Bioconductor version 2.11 (BiocInstaller 1.8.3), R version 2.15.
            Installing package(s) 'cummeRbund'
            also installing the dependencies ‘RCurl’, ‘biomaRt’, ‘GenomicFeatures’, ‘biovizBase’, ‘rtracklayer’, ‘Gviz’

            trying URL 'http://cran.fhcrc.org/src/contrib/RCurl_1.95-3.tar.gz'
            Content type 'application/x-gzip' length 868491 bytes (848 Kb)
            opened URL
            ==================================================
            downloaded 848 Kb

            trying URL 'http://bioconductor.org/packages/2.11/bioc/src/contrib/biomaRt_2.14.0.tar.gz'
            Content type 'application/x-gzip' length 276758 bytes (270 Kb)
            opened URL
            ==================================================
            downloaded 270 Kb

            trying URL 'http://bioconductor.org/packages/2.11/bioc/src/contrib/GenomicFeatures_1.10.1.tar.gz'
            Content type 'application/x-gzip' length 742663 bytes (725 Kb)
            opened URL
            ==================================================
            downloaded 725 Kb

            trying URL 'http://bioconductor.org/packages/2.11/bioc/src/contrib/biovizBase_1.6.2.tar.gz'
            Content type 'application/x-gzip' length 1026756 bytes (1002 Kb)
            opened URL
            ==================================================
            downloaded 1002 Kb

            trying URL 'http://bioconductor.org/packages/2.11/bioc/src/contrib/rtracklayer_1.18.2.tar.gz'
            Content type 'application/x-gzip' length 1308890 bytes (1.2 Mb)
            opened URL
            ==================================================
            downloaded 1.2 Mb

            trying URL 'http://bioconductor.org/packages/2.11/bioc/src/contrib/Gviz_1.2.1.tar.gz'
            Content type 'application/x-gzip' length 1392463 bytes (1.3 Mb)
            opened URL
            ==================================================
            downloaded 1.3 Mb

            trying URL 'http://bioconductor.org/packages/2.11/bioc/src/contrib/cummeRbund_2.0.0.tar.gz'
            Content type 'application/x-gzip' length 2327551 bytes (2.2 Mb)
            opened URL
            ==================================================
            downloaded 2.2 Mb

            * installing *source* package ‘RCurl’ ...
            ** package ‘RCurl’ successfully unpacked and MD5 sums checked
            checking for curl-config... no
            Cannot find curl-config
            ERROR: configuration failed for package ‘RCurl’
            * removing ‘/home/liuzi/R/x86_64-pc-linux-gnu-library/2.15/RCurl’
            ERROR: dependency ‘RCurl’ is not available for package ‘biomaRt’
            * removing ‘/home/liuzi/R/x86_64-pc-linux-gnu-library/2.15/biomaRt’
            ERROR: dependency ‘RCurl’ is not available for package ‘rtracklayer’
            * removing ‘/home/liuzi/R/x86_64-pc-linux-gnu-library/2.15/rtracklayer’
            ERROR: dependencies ‘rtracklayer’, ‘biomaRt’, ‘RCurl’ are not available for package ‘GenomicFeatures’
            * removing ‘/home/liuzi/R/x86_64-pc-linux-gnu-library/2.15/GenomicFeatures’
            ERROR: dependency ‘GenomicFeatures’ is not available for package ‘biovizBase’
            * removing ‘/home/liuzi/R/x86_64-pc-linux-gnu-library/2.15/biovizBase’
            ERROR: dependencies ‘rtracklayer’, ‘biomaRt’, ‘GenomicFeatures’, ‘biovizBase’ are not available for package ‘Gviz’
            * removing ‘/home/liuzi/R/x86_64-pc-linux-gnu-library/2.15/Gviz’
            ERROR: dependencies ‘rtracklayer’, ‘Gviz’ are not available for package ‘cummeRbund’
            * removing ‘/home/liuzi/R/x86_64-pc-linux-gnu-library/2.15/cummeRbund’

            The downloaded source packages are in
            ‘/tmp/RtmpSX1mhe/downloaded_packages’
            Warning messages:
            1: In install.packages(pkgs = pkgs, lib = lib, repos = repos, ...) :
            installation of package ‘RCurl’ had non-zero exit status
            2: In install.packages(pkgs = pkgs, lib = lib, repos = repos, ...) :
            installation of package ‘biomaRt’ had non-zero exit status
            3: In install.packages(pkgs = pkgs, lib = lib, repos = repos, ...) :
            installation of package ‘rtracklayer’ had non-zero exit status
            4: In install.packages(pkgs = pkgs, lib = lib, repos = repos, ...) :
            installation of package ‘GenomicFeatures’ had non-zero exit status
            5: In install.packages(pkgs = pkgs, lib = lib, repos = repos, ...) :
            installation of package ‘biovizBase’ had non-zero exit status
            6: In install.packages(pkgs = pkgs, lib = lib, repos = repos, ...) :
            installation of package ‘Gviz’ had non-zero exit status
            7: In install.packages(pkgs = pkgs, lib = lib, repos = repos, ...) :
            installation of package ‘cummeRbund’ had non-zero exit status
            8: installed directory not writable, cannot update packages 'boot', 'class',
            'cluster', 'foreign', 'lattice', 'MASS', 'Matrix', 'mgcv', 'nlme', 'nnet',
            'rpart', 'spatial', 'survival'
            > library(cummeRbund)
            Error in library(cummeRbund) : there is no package called ‘cummeRbund


            BTW, my R version is 2.15.1 (2012-06-22) -

            Is anybody can tell me what libs that I need and how to install them?

            Thanks,
            Last edited by myRNA_Seq; 02-25-2013, 12:52 PM.

            Comment


            • #21
              Error in library(cummeRbund) : there is no package called ‘cummeRbund

              duplicated posting
              Last edited by myRNA_Seq; 02-25-2013, 01:08 PM. Reason: duplicated

              Comment


              • #22
                > library(cummeRbund) Error in library(cummeRbund) : there is no package called ‘cumm

                I also tried the following as GenoMax suggested to cnyh:

                liuzi@iitm50ws1255:/$ sudo apt-get install libxml2 libcurl
                [sudo] password for liuzi:
                Reading package lists... Done
                Building dependency tree
                Reading state information... Done
                E: Unable to locate package libcurl

                Comment


                • #23
                  I also tried the following
                  sudo apt-get install libxml2-dev;
                  and still get the same error message...

                  Comment


                  • #24
                    Originally posted by myRNA_Seq View Post
                    I also tried the following
                    sudo apt-get install libxml2-dev;
                    and still get the same error message...
                    I think you will need one of the dev packages for curl. Try this one

                    Code:
                    sudo apt-get install libcurl4-openssl-dev

                    Comment


                    • #25
                      Thank you,GenoMax for your quick reply.

                      I installed "sudo apt-get install libcurl4-openssl-dev" as you suggested.
                      I still get the same error below.

                      > library(cummeRbund)
                      Error in library(cummeRbund) : there is no package called ‘cummeRbund’

                      Comment


                      • #26
                        Originally posted by myRNA_Seq View Post
                        Thank you,GenoMax for your quick reply.

                        I installed "sudo apt-get install libcurl4-openssl-dev" as you suggested.
                        I still get the same error below.

                        > library(cummeRbund)
                        Error in library(cummeRbund) : there is no package called ‘cummeRbund’
                        Did you try to re-install cummeRbund in R after installing the curl library?

                        Code:
                        > source("http://bioconductor.org/biocLite.R")
                        > biocLite("cummeRbund")

                        Comment


                        • #27
                          Thank you so much GenoMax!
                          Following your instruction, I re-installed cummeRbund in R, now it works very well.

                          Comment


                          • #28
                            I have another problem now.

                            I downloaded latest version of cufflinks binary and also added them to my path as following:
                            export PATH=$PATH:~/cufflinks-2.0.2.Linux_x86_64/cufflinks
                            export PATH=$PATH:~/cufflinks-2.0.2.Linux_x86_64/cuffdiff
                            export PATH=$PATH:~/cufflinks-2.0.2.Linux_x86_64/cuffcompare

                            When I tried to run cuffcompare, it gave me a warning:

                            Warning: Your version of Cufflinks is not up-to-date. It is recommended that you upgrade to Cufflinks v2.0.2 to benefit from the most recent features and bug fixes (http://cufflinks.cbcb.umd.edu).

                            and without *.tmap file generated.

                            So far I have checked, there isn't a copy of cufflinks in other PATHs, such as .: /usr/bin /usr/local/bin etc...

                            Is there any problem in terms of the path setting?

                            Thanks a lot
                            Last edited by myRNA_Seq; 02-27-2013, 06:41 AM.

                            Comment


                            • #29
                              Originally posted by myRNA_Seq View Post
                              I have another problem now.


                              So far I have checked, there isn't a copy of cufflinks in other PATHs, such as .: /usr/bin /usr/local/bin etc...

                              Is there any problem in terms of the path setting?

                              Thanks a lot
                              Can you check the following and verify that you are indeed pointing to the right cufflinks executable?

                              Code:
                              $which cufflinks

                              Comment


                              • #30
                                It says: /usr/bin/cufflinks.
                                When I use echo $PATH, it didn't show there, why?

                                ************
                                I have tried full path. It works without warning anymore, and got all the output files except *.refmap *.tmap file. Do you know why?

                                I followed the instruction from the paper "Differential gene and transcript expression analysis of RNA-seq experiments with TopHat and Cufflinks" (http://www.nature.com/nprot/journal/....2012.016.html) and use exact files in the examples.

                                $ find . -name transcripts.gtf > gtf_out_list.txt
                                $ ~/cufflinks-2.0.2.Linux_x86_64/cuffcompare - i gtf_out_list.txt -r gene.gtf

                                Comment

                                Latest Articles

                                Collapse

                                • seqadmin
                                  Strategies for Sequencing Challenging Samples
                                  by seqadmin


                                  Despite advancements in sequencing platforms and related sample preparation technologies, certain sample types continue to present significant challenges that can compromise sequencing results. Pedro Echave, Senior Manager of the Global Business Segment at Revvity, explained that the success of a sequencing experiment ultimately depends on the amount and integrity of the nucleic acid template (RNA or DNA) obtained from a sample. “The better the quality of the nucleic acid isolated...
                                  03-22-2024, 06:39 AM
                                • seqadmin
                                  Techniques and Challenges in Conservation Genomics
                                  by seqadmin



                                  The field of conservation genomics centers on applying genomics technologies in support of conservation efforts and the preservation of biodiversity. This article features interviews with two researchers who showcase their innovative work and highlight the current state and future of conservation genomics.

                                  Avian Conservation
                                  Matthew DeSaix, a recent doctoral graduate from Kristen Ruegg’s lab at The University of Colorado, shared that most of his research...
                                  03-08-2024, 10:41 AM

                                ad_right_rmr

                                Collapse

                                News

                                Collapse

                                Topics Statistics Last Post
                                Started by seqadmin, Yesterday, 06:37 PM
                                0 responses
                                10 views
                                0 likes
                                Last Post seqadmin  
                                Started by seqadmin, Yesterday, 06:07 PM
                                0 responses
                                9 views
                                0 likes
                                Last Post seqadmin  
                                Started by seqadmin, 03-22-2024, 10:03 AM
                                0 responses
                                49 views
                                0 likes
                                Last Post seqadmin  
                                Started by seqadmin, 03-21-2024, 07:32 AM
                                0 responses
                                67 views
                                0 likes
                                Last Post seqadmin  
                                Working...
                                X