Error installing vcftools

[kurban910]

you're missing the C++ compiler.

If you're on a debian-based distro just do

sudo apt-get install g++

and try again.

thank you, that worked .

[Cytosine]

you're missing the C++ compiler.

If you're on a debian-based distro just do

sudo apt-get install g++

and try again.

[kurban910]

hello!
when i am trying to install vcftools_0.1.12b:

kurban@kurban-X550VC:~/Downloads/vcftools_0.1.12b$ make

and it showed this:

make[1]: Entering directory `/home/kurban/Downloads/vcftools_0.1.12b/cpp'
g++ -c -O2 -D_FILE_OFFSET_BITS=64  vcftools.cpp -o vcftools.o
make[1]: g++: Command not found
make[1]: *** [vcftools.o] Error 127
make[1]: Leaving directory `/home/kurban/Downloads/vcftools_0.1.12b/cpp'
/bin/sh: 3: cd: can't cd to perl
make: *** [install] Error 2

before i do make ,it is required to do this:

export PERL5LIB=/path/to/your/vcftools-directory/perl/

and i expressed it in this way:

export PERL5LIB=/home/kurban/Downloads/vcftools_0.1.12b/perl

i am new at linux, so i did not know where i did wrong or what should i do. please give some corrections on this!!!

[volavii]

Hey

I also have problems installing vcftools. More precisely:
I executed the test.t script, as suggested, and could solve nearly all problems instead vcf-stats


ok 13 - Testing next_data_array
not ok 14 - Testing vcf-stats .. perl -I/home/nancy/programs/vcftools_0.1.11/perl -MVcf /home/nancy/programs/vcftools_0.1.11/perl/vcf-stats /home/nancy/programs/vcftools_0.1.11/perl/../examples/valid-4.0.vcf
# Failed test 'Testing vcf-stats .. perl -I/home/nancy/programs/vcftools_0.1.11/perl -MVcf /home/nancy/programs/vcftools_0.1.11/perl/vcf-stats /home/nancy/programs/vcftools_0.1.11/perl/../examples/valid-4.0.vcf'
# at /home/nancy/programs/vcftools_0.1.11/perl/test.t line 165.
# Structures begin differing at:
# $got->[47] = ' 'other_count' => 2,
# '
# $expected->[47] = ' 'hom_AA_count' => 4,
# '
ok 15 - Testing add_columns with genotypes full, 4.0.

i have no clue what goes wrong here. anyone an idea?

Greeting,
volavii

[pengchy]

thanks GenoMax,

I have compiled successfully in another node, it seems caused by the absence of libz version.

Thank you.

[GenoMax]

What version of zlib do you have currently installed? The "gz*" undefined references would point to absence (or presence of an older) version of zlib.

[pengchy]

Hi all,

I have encountered an error when install vcftools version 9, 10 and 11 as following, but successfully for version 4a.

I also searched the problem "warning: the use of `tmpnam' is dangerous, better use `mkstemp'" and got this web page:

http://software.intel.com/en-us/articles/would-like-to-disable-compiler-warning-on-tmpnam/

Any suggestions will be appreciated.

Pengcheng

make[1]: Entering directory `/panfs/home/yangpc/soft/07.reseq/vcftools_0.1.11/cpp'
g++ -c -O2 -D_FILE_OFFSET_BITS=64  vcftools.cpp -o vcftools.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  vcftools.cpp > vcftools.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  bcf_file.cpp -o bcf_file.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  bcf_file.cpp > bcf_file.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  vcf_file.cpp -o vcf_file.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  vcf_file.cpp > vcf_file.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  variant_file.cpp -o variant_file.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  variant_file.cpp > variant_file.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  bcf_entry.cpp -o bcf_entry.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  bcf_entry.cpp > bcf_entry.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  vcf_entry.cpp -o vcf_entry.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  vcf_entry.cpp > vcf_entry.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  entry.cpp -o entry.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  entry.cpp > entry.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  entry_setters.cpp -o entry_setters.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  entry_setters.cpp > entry_setters.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  entry_getters.cpp -o entry_getters.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  entry_getters.cpp > entry_getters.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  vcf_entry_setters.cpp -o vcf_entry_setters.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  vcf_entry_setters.cpp > vcf_entry_setters.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  bcf_entry_setters.cpp -o bcf_entry_setters.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  bcf_entry_setters.cpp > bcf_entry_setters.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  variant_file_filters.cpp -o variant_file_filters.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  variant_file_filters.cpp > variant_file_filters.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  variant_file_output.cpp -o variant_file_output.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  variant_file_output.cpp > variant_file_output.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  variant_file_format_convert.cpp -o variant_file_format_convert.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  variant_file_format_convert.cpp > variant_file_format_convert.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  variant_file_diff.cpp -o variant_file_diff.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  variant_file_diff.cpp > variant_file_diff.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  header.cpp -o header.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  header.cpp > header.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  parameters.cpp -o parameters.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  parameters.cpp > parameters.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  variant_file_index.cpp -o variant_file_index.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  variant_file_index.cpp > variant_file_index.d
g++ -c -O2 -D_FILE_OFFSET_BITS=64  output_log.cpp -o output_log.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  output_log.cpp > output_log.d
gcc -O2 -m64 -O2 -D_FILE_OFFSET_BITS=64   -c -o bgzf.o bgzf.c
g++ -c -O2 -D_FILE_OFFSET_BITS=64  gamma.cpp -o gamma.o
g++ -MM -O2 -D_FILE_OFFSET_BITS=64  gamma.cpp > gamma.d
g++ -O2 -D_FILE_OFFSET_BITS=64  vcftools.o bcf_file.o vcf_file.o variant_file.o bcf_entry.o vcf_entry.o entry.o entry_setters.o entry_getters.o vcf_entry_setters.o   bcf_entry_setters.o variant_file_filters.o variant_file_output.o variant_file_format_convert.o variant_file_diff.o header.o parameters.o variant_file_index.o output_log.o bgzf.o gamma.o -o vcftools -lz 
variant_file_format_convert.o: In function `variant_file::output_as_LDhat_phased(std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)':
variant_file_format_convert.cpp:(.text+0x41d3): warning: the use of `tmpnam' is dangerous, better use `mkstemp'
bcf_file.o: In function `bcf_file::get_filepos()':
bcf_file.cpp:(.text+0x125): undefined reference to `gztell64'
bcf_file.o: In function `bcf_file::get_eof()':
bcf_file.cpp:(.text+0x811): undefined reference to `gzseek64'
bcf_file.cpp:(.text+0x840): undefined reference to `gzseek64'
bcf_file.o: In function `bcf_file::open()':
bcf_file.cpp:(.text+0x1e27): undefined reference to `gzopen64'
bcf_file.cpp:(.text+0x1ec0): undefined reference to `gzbuffer'
bcf_file.o: In function `bcf_file::set_filepos(std::fpos<__mbstate_t>&)':
bcf_file.cpp:(.text+0x76): undefined reference to `gzseek64'
vcf_file.o: In function `vcf_file::get_filepos()':
vcf_file.cpp:(.text+0xd2): undefined reference to `gztell64'
vcf_file.o: In function `vcf_file::open()':
vcf_file.cpp:(.text+0xa5d): undefined reference to `gzopen64'
vcf_file.cpp:(.text+0xaf6): undefined reference to `gzbuffer'
vcf_file.o: In function `vcf_file::set_filepos(std::fpos<__mbstate_t>&)':
vcf_file.cpp:(.text+0x85): undefined reference to `gzseek64'
variant_file_filters.o: In function `variant_file::filter_sites_by_positions(std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)':
variant_file_filters.cpp:(.text+0x630b): undefined reference to `gzopen64'
variant_file_filters.cpp:(.text+0x6ce3): undefined reference to `gzopen64'
variant_file_index.o: In function `variant_file::write_index_file(std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)':
variant_file_index.cpp:(.text+0x1ca): undefined reference to `gzopen64'
variant_file_index.o: In function `variant_file::read_index_file(std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)':
variant_file_index.cpp:(.text+0x7a1): undefined reference to `gzopen64'
collect2: ld returned 1 exit status
make[1]: *** [vcftools] Error 1
make[1]: Leaving directory `/panfs/home/yangpc/soft/07.reseq/vcftools_0.1.11/cpp'
/bin/sh: line 1: cd: perl: No such file or directory
make: *** [install] Error 1

[CowGirl]

Hey LML,
thanks for the tip. I can't take credit for the "touch" strategy (a big "Thank you" to the colleaugues in Austria!).
Unforunately I've already installed everything else (i.e. g++, zlib, tabix, vcftools) "the hard way" ;-) , but I'm sure others will find the information useful as well. Cheers

[LML]

Hello CowGirl,

I had the same issues with the two missing files. Thanks for suggesting the 'touch' fix, as it seems to have fixed the problem (fingers crossed)!

In case you are still looking for a method to test the program: I found a fantastic website which gives really nice instructions on how to install all of the programs needed to run vcftools (g++, zlib, tabix, vcftools) and also contains a method for testing tabix and vcftools at the end of the page. See the following link:

http://gettinggeneticsdone.blogspot.ca/2011/04/how-to-get-allele-frequencies-and.html

[CowGirl]

Hi again, I've now got the first few problems solved:

cp: /opt/local/bin/vcftools_0.1.10/perl/fill-rsIDs: No such file or directory
cp: /opt/local/bin/vcftools_0.1.10/perl/vcf-filter: No such file or directory

can be fixed if you "touch" the files fill-rsIDs and vcf-filter... the files don't do anything, but there is no error message anymore.

Apparently the test.t executable doesn't work unless the the Test::Most package (perl) is installed. This can be installed using "cpan":
1) export PERL5LIB=/path/to/your/installation/perl
2) cpanm Test::Most
3) cpan App::cpanminus

Unfortunately I still can't get test.t to run smoothly....
here the last 3 lines of output....

# Looks like you planned 74 tests but ran 9.
# Looks like you failed 6 tests of 9 run.
# Looks like your test exited with 2 just after 9.

[CowGirl]

Trouble installing vcftools on a mac

Hi everyone,
I've got a similar problem as Saras and would really appreciate some help.

I've downloaded vcftools to my /opt/local/bin directory (Mac), unpacked it, and have typed "make" in the vcftools folder. All but two lines in the output look good, however the two "problem" lines already show that something didn't work properly:

cp: /opt/local/bin/vcftools_0.1.10/perl/fill-rsIDs: No such file or directory
cp: /opt/local/bin/vcftools_0.1.10/perl/vcf-filter: No such file or directory

When I try to run the test.t script with the following command:

/opt/local/bin/vcftools_0.1.10/perl/test.t

I get the following error message:

Can't locate Test/Most.pm in @INC (@INC contains: /opt/local/bin/vcftools_0.1.10/perl /lib /Library/Perl/5.12/darwin-thread-multi-2level /Library/Perl/5.12 /Network/Library/Perl/5.12/darwin-thread-multi-2level /Network/Library/Perl/5.12 /Library/Perl/Updates/5.12.4 /System/Library/Perl/5.12/darwin-thread-multi-2level /System/Library/Perl/5.12 /System/Library/Perl/Extras/5.12/darwin-thread-multi-2level /System/Library/Perl/Extras/5.12 .) at /opt/local/bin/vcftools_0.1.10/perl/test.t line 17.
BEGIN failed--compilation aborted at /opt/local/bin/vcftools_0.1.10/perl/test.t line 17.

Has anyone run into something like this?

Thanks in advance for any help.

[saraswathi55]

Trouble installing vcf tools

Hello,
I downloaded vcf tools in my Mac. I had to download make, Tabix and vcf tools. I put the path for the perl directories in these two directories in my PATH variable. I ran make without error msgs. When I go into my vcftools and type per/test.t I am getting this msg.

SARASHOMENWerl saras$ test.t
Can't locate Test/Most.pm in @INC (@INC contains: /Users/saras/src/vcftools_0.1.8a/perl /saras/vcftools/perl /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at /Users/saras/src/vcftools_0.1.8a/perl/test.t line 17.
BEGIN failed--compilation aborted at /Users/saras/src/vcftools_0.1.8a/perl/test.t line 17.
SARASHOMENWerl saras$


What is missing ? Please help. Thanks.

Saras

[jlelias]

Awesome! That worked. Thank you!

[Alex Renwick]

It's possible that the space in "/home/lab/Desktop/linux files" is making trouble. Remove the space, or move the vcftools_0.1.8a directory to the Desktop, and try again.

[jlelias]

Hi! I downloaded the latest vcftools, moved it into my desktop file, then commanded:
tar -zxvf vcftools_0.1.8a.tar.gz
cd vcftools_0.1.8a
make

However, I received the following error:

make[1]: Entering directory `/home/lab/Desktop/linux files/vcftools_0.1.8a/cpp'
g++ -O2 -Wall -Wextra vcftools.cpp vcf_file.cpp vcf_entry.cpp vcf_entry_getters.cpp vcf_entry_setters.cpp vcf_file_filters.cpp vcf_file_output.cpp vcf_file_format_convert.cpp vcf_file_diff.cpp parameters.cpp vcf_file_index.cpp output_log.cpp -o vcftools -lz
vcf_file_output.cpp: In member function ‘void vcf_file:utput_PCA(const string&, bool, int)’:
vcf_file_output.cpp:2774:6: warning: parameter ‘use_normalisation’ set but not used [-Wunused-but-set-parameter]
vcf_file_output.cpp:2774:6: warning: parameter ‘SNP_loadings_N_PCs’ set but not used [-Wunused-but-set-parameter]
vcf_file_format_convert.cpp: In member function ‘void vcf_file:utput_as_012_matrix(const string&)’:
vcf_file_format_convert.cpp:453:7: warning: variable ‘phase’ set but not used [-Wunused-but-set-variable]
cp /home/lab/Desktop/linux files/vcftools_0.1.8a/cpp/vcftools /home/lab/Desktop/ ./ ./ ./ 2012/vcftools_0.1.8a//bin/vcftools
/bin/sh: Syntax error: Unterminated quoted string
make[1]: *** [vcftools] Error 2
make[1]: Leaving directory `/home/lab/Desktop/linux files/vcftools_0.1.8a/cpp'
cd: 2: can't cd to perl
make: *** [install] Error 2

Any help would be very appreciated! Thanks!