Seqanswers Leaderboard Ad
Collapse
Announcement
Collapse
No announcement yet.
X
-
You may need a corresponding older version of bowtie to go with TopHat 2.0.9. Try v.2.1.0.
Leave a comment:
-
Weird. After I replaced Tophat's 2.0.12 version with the 2.0.9 version it doesn't find bowtie anymore. Even though it's in the PATH. I tried with --bowtie1 and --bowtie2. Bowtie2 is present as I can access it from the command line.
What's the catch?
[2014-08-27 09:09:09] Beginning TopHat run (v2.0.9)
-----------------------------------------------
[2014-08-27 09:09:09] Checking for Bowtie
Bowtie 2 not found, checking for older version..
Error: Bowtie not found on this system.
Leave a comment:
-
Ok. Thank you. I'll continue with v.2.0.9 then. I'm still waiting for a response from the developers after I reported the issue. Once I get an update I will post it here.
Leave a comment:
-
Unfortunately no. Your only option is to use TopHat 2.0.9 on OS X, unless you want to try compiling from source (not simple).
Leave a comment:
-
Has this issue been resolved? Any updates? I'm dealing the exact same errors/error logs as described above.
Leave a comment:
-
It appears that all Mac binaries since 2.0.10 have this problem. -stdlib option to build the binary either needs libstdc++ or libc++ (am not a developer) and it does not appear to be properly linked for Mac binaries. I am surprised that no one has reported this problem to the developers. Until the authors correct this we may be out-of-luck.
Has anyone tried to compile from source?
The last version of TopHat that is functional on OS X (10.9.x) is v.2.0.9.Last edited by GenoMax; 08-14-2014, 09:39 AM.
Leave a comment:
-
Such problem disappears with the test_data by TapHat v2.0.10;
however, in TapHat v2.0.10; it has Error: gtf_to_fasta returned an error. with my own data.
Leave a comment:
-
Yes, I am using Mac OS.
Same problem with the test_data by TopHat run (v2.0.11)
Leave a comment:
-
TopHat - Error: gtf_to_fasta returned an error.
has this problem solved? I met the same issue.
Leave a comment:
-
My submmitted commands:
mkdir testdata_thout
tophat2 -p 8 -o testdata_thout test_ref reads_1.fq reads_2.fq
Leave a comment:
-
I downloaded v.2.0.11 of TopHat and am now getting this error message after running on the test data set:
[2014-07-30 16:36:24] Beginning TopHat run (v2.0.11)
-----------------------------------------------
[2014-07-30 16:36:24] Checking for Bowtie
Bowtie version: 2.2.3.0
[2014-07-30 16:36:24] Checking for Samtools
Samtools version: 0.1.19.0
[2014-07-30 16:36:24] Checking for Bowtie index files (genome)..
[2014-07-30 16:36:24] Checking for reference FASTA file
[2014-07-30 16:36:24] Generating SAM header for test_ref
[2014-07-30 16:36:24] Preparing reads
left reads: min. length=75, max. length=75, 100 kept reads (0 discarded)
right reads: min. length=75, max. length=75, 100 kept reads (0 discarded)
[2014-07-30 16:36:24] Mapping left_kept_reads to genome test_ref with Bowtie2
[FAILED]
Error running:
/usr/local/bin/bam2fastx --all testdata_thout/tmp/left_kept_reads.bam|/usr/local/bin/bowtie2 -k 20 -D 15 -R 2 -N 0 -L 20 -i S,1,1.25 --gbar 4 --mp 6,2 --np 1 --rdg 5,3 --rfg 5,3 --score-min C,-14,0 -p 8 --sam-no-hd -x test_ref -|/usr/local/bin/fix_map_ordering --bowtie2-min-score 15 --read-mismatches 2 --read-gap-length 2 --read-edit-dist 2 --read-realign-edit-dist 3 --index-outfile testdata_thout/tmp/left_kept_reads.mapped.bam.index --sam-header testdata_thout/tmp/test_ref_genome.bwt.samheader.sam - testdata_thout/tmp/left_kept_reads.mapped.bam testdata_thout/tmp/left_kept_reads_unmapped.bam
Leave a comment:
-
Can you try a previous version of TopHat with the test data (say v.2.0.11, http://ccb.jhu.edu/software/tophat/downloads/) to see if this is a problem with the latest Mac binary that is being supplied?
Leave a comment:
-
My command:
tophat -p 8 -o test_thout test_ref reads_1.fq reads_2.fq
Output:
[2014-07-29 09:10:21] Beginning TopHat run (v2.0.12)
-----------------------------------------------
[2014-07-29 09:10:21] Checking for Bowtie
Bowtie version: 2.2.3.0
[2014-07-29 09:10:21] Checking for Samtools
Samtools version: 0.1.19.0
[2014-07-29 09:10:21] Checking for Bowtie index files (genome)..
[2014-07-29 09:10:21] Checking for reference FASTA file
[2014-07-29 09:10:21] Generating SAM header for test_ref
[2014-07-29 09:10:21] Preparing reads
left reads: min. length=75, max. length=75, 100 kept reads (0 discarded)
right reads: min. length=75, max. length=75, 100 kept reads (0 discarded)
[2014-07-29 09:10:21] Mapping left_kept_reads to genome test_ref with Bowtie2
[2014-07-29 09:10:21] Mapping left_kept_reads_seg1 to genome test_ref with Bowtie2 (1/3)
[2014-07-29 09:10:22] Mapping left_kept_reads_seg2 to genome test_ref with Bowtie2 (2/3)
[2014-07-29 09:10:22] Mapping left_kept_reads_seg3 to genome test_ref with Bowtie2 (3/3)
[2014-07-29 09:10:22] Mapping right_kept_reads to genome test_ref with Bowtie2
[2014-07-29 09:10:22] Mapping right_kept_reads_seg1 to genome test_ref with Bowtie2 (1/3)
[2014-07-29 09:10:22] Mapping right_kept_reads_seg2 to genome test_ref with Bowtie2 (2/3)
[2014-07-29 09:10:22] Mapping right_kept_reads_seg3 to genome test_ref with Bowtie2 (3/3)
[2014-07-29 09:10:22] Searching for junctions via segment mapping
[FAILED]
Error: segment-based junction search failed with err =-5
When I look in segment_juncs log, I see the same error as with my actual dataset:
segment_juncs v2.0.12 (4277)
---------------------------
[samopen] SAM header is present: 1 sequences.
Loading reference sequences...
Loading test_chromosome...done
Loading ...done
>> Performing segment-search:
Loading left segment hits...
dyld: lazy symbol binding failed: Symbol not found: __ZNKSt5ctypeIcE13_M_widen_initEv
Referenced from: /usr/local/bin/segment_juncs
Expected in: /usr/lib/libstdc++.6.dylib
dyld: Symbol not found: __ZNKSt5ctypeIcE13_M_widen_initEv
Referenced from: /usr/local/bin/segment_juncs
Expected in: /usr/lib/libstdc++.6.dylib
It seems like more of a "my computer problem" than a TopHat specific problem. I'm somewhat of a novice when it comes to libraries, etc. When I tried to search for a solution to these "symbol not found" errors, I came up pretty empty handed.
Thanks,
James
Leave a comment:
Latest Articles
Collapse
-
by seqadmin
While isolating and preparing single cells for sequencing was historically the bottleneck, recent technological advancements have shifted the challenge to data analysis. This highlights the rapidly evolving nature of single-cell sequencing. The inherent complexity of single-cell analysis has intensified with the surge in data volume and the incorporation of diverse and more complex datasets. This article explores the challenges in analysis, examines common pitfalls, offers...-
Channel: Articles
Today, 07:15 AM -
-
by seqadmin
Technological advances have led to drastic improvements in the field of precision medicine, enabling more personalized approaches to treatment. This article explores four leading groups that are overcoming many of the challenges of genomic profiling and precision medicine through their innovative platforms and technologies.
Somatic Genomics
“We have such a tremendous amount of genetic diversity that exists within each of us, and not just between us as individuals,”...-
Channel: Articles
05-24-2024, 01:16 PM -
ad_right_rmr
Collapse
News
Collapse
Topics | Statistics | Last Post | ||
---|---|---|---|---|
Started by seqadmin, Today, 08:18 AM
|
0 responses
10 views
0 likes
|
Last Post
by seqadmin
Today, 08:18 AM
|
||
Started by seqadmin, Today, 08:04 AM
|
0 responses
12 views
0 likes
|
Last Post
by seqadmin
Today, 08:04 AM
|
||
Started by seqadmin, 06-03-2024, 06:55 AM
|
0 responses
13 views
0 likes
|
Last Post
by seqadmin
06-03-2024, 06:55 AM
|
||
Started by seqadmin, 05-30-2024, 03:16 PM
|
0 responses
27 views
0 likes
|
Last Post
by seqadmin
05-30-2024, 03:16 PM
|
Leave a comment: