Tony: Do you need 1.7 for some specific reason? It may be better to go with bcl2fastq (v.1.8.4) otherwise.
Seqanswers Leaderboard Ad
Collapse
Announcement
Collapse
No announcement yet.
X
-
Can you try installing the rpm package (http://namhuy.net/1207/how-to-instal...-debian.html)? That may be simpler.
Comment
-
Originally posted by GenoMax View PostCan you try installing the rpm package (http://namhuy.net/1207/how-to-instal...-debian.html)? That may be simpler.
Code:admin@seq-analysis:~/bcl$ sudo alien bcl2fastq-1.8.4-Linux-x86_64.rpm bcl2fastq_1.8.4-2_amd64.deb generated admin@seq-analysis:~/bcl$ sudo dpkg -i bcl2fastq_1.8.4-2_amd64.deb (Reading database ... 273160 files and directories currently installed.) Preparing to unpack bcl2fastq_1.8.4-2_amd64.deb ... Unpacking bcl2fastq (1.8.4-2) over (1.8.4-2) ... Setting up bcl2fastq (1.8.4-2) ... admin@seq-analysis:~/bcl
Code:configureBclTofastq.pl --input-dir ./140321_M01520_0085_000000000-A7FD0/Data/Intensities/BaseCalls/ "my" variable $value masks earlier declaration in same statement at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 760. syntax error at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 747, near "$variable qw(ELAND_FASTQ_FILES_PER_PROCESS)" Global symbol "$variable" requires explicit package name at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 749. syntax error at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 751, near "$directory qw(ELAND_GENOME)" Global symbol "$self" requires explicit package name at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 753. Global symbol "$directory" requires explicit package name at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 753. Global symbol "$project" requires explicit package name at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 753. Global symbol "$sample" requires explicit package name at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 753. Global symbol "$lane" requires explicit package name at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 753. Global symbol "$barcode" requires explicit package name at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 753. Global symbol "$reference" requires explicit package name at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 753. syntax error at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm line 761, near "}" /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment/Config.pm has too many errors. Compilation failed in require at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment.pm line 61. BEGIN failed--compilation aborted at /usr/local/lib/bcl2fastq-1.8.4/perl/Casava/Alignment.pm line 61. Compilation failed in require at /usr/local/bin/configureBclToFastq.pl line 250. BEGIN failed--compilation aborted at /usr/local/bin/configureBclToFastq.pl line 250.
Last edited by TonyBrooks; 05-01-2014, 07:19 AM.
Comment
-
Tony: You need to minimally provide a samplesheet by specifying --samplesheet Samphesheet_file.csv (it needs to be in a specific format). I have an example in this post: http://seqanswers.com/forums/showpos...4&postcount=14
Can you try this?
Code:$ configureBclTofastq.pl --input-dir ./140321_M01520_0085_000000000-A7FD0/Data/Intensities/BaseCalls/ --samplesheet /path_to/samplesheet.csv --fastq-cluster-count 0
Last edited by GenoMax; 05-01-2014, 08:00 AM.
Comment
-
Originally posted by GenoMax View PostTony: You need to minimally provide a samplesheet by specifying --samplesheet Samphesheet_file.csv (it needs to be in a specific format). I have an example in this post: http://seqanswers.com/forums/showpos...4&postcount=14
Can you try this?
Code:$ configureBclTofastq.pl --input-dir ./140321_M01520_0085_000000000-A7FD0/Data/Intensities/BaseCalls/ --samplesheet /path_to/samplesheet.csv --fastq-cluster-count 0
I think I may have found the problem. I'm wondering if the problem is to do with the version of boost installed. I'm going to try and remove and install an older version and see if it works
Comment
-
-
Originally posted by GenoMax View PostIs this Bcl2fastq install?
I installed bcl2fastq-1.8.4-Linux-x86_64.rpm using the alien command into Ubuntu 13.10. After upgrading Ubuntu to 14.04 LTS, configureBclToFastq.pl raises errors in Config.pm. These errors are the same as TonyBrooks' post http://seqanswers.com/forums/showpos...9&postcount=18.
Comment
-
Originally posted by GenoMax View PostHave you already tried to reinstall Bcl2fastq after the upgrade to 14.04 using the same method you used as before?
Are you using a valid SampleSheet.csv file?
Before installing bcl2fastq, I purged the package using "sudo dpkg --purge bcl2fastq" to uninstall completely. Errors were not reported during the uninstall process.
I used a SampleSheet.csv file validated on other CentOS machine that can run configureBclToFastq.pl.
On the CentOS machine, "configureBclToFastq.pl --help" returns help messages, however on the Ubuntu14.04 machine, the same command-line returns Perl's errors.
Comment
-
Originally posted by GenoMax View PostWhich version of perl do you have as system default on Ubuntu 14.04?
On RHEL we are explicitly using perl 5.12.0 (even though the system perl is set to v.5.8.8) for bcl2fastq.
Ubuntu 14.04 LTS : perl v5.18.2-2
So far, I have used only system default perls.
Comment
-
That could be the potential problem. Newer versions of perl may be more strict on syntax checking which is leading to those errors.
Since you probably do not want to mess with system perl you may want to try something like this to use an older version of perl: http://perlbrew.pl/ I have not tried this myself.
Comment
-
Originally posted by GenoMax View PostThat could be the potential problem. Newer versions of perl may be more strict on syntax checking which is leading to those errors.
Since you probably do not want to mess with system perl you may want to try something like this to use an older version of perl: http://perlbrew.pl/ I have not tried this myself.
The followings are a protocol to prepare to use Bcl2Fastq on Ubuntu 14.04 LTE:
Code:sudo alien -i bcl2fastq-1.8.4-Linux-x86_64.rpm sudo apt-get install build-essential curl -kL http://install.perlbrew.pl | bash echo >> ~/.bash_profile "source ~/perl5/perlbrew/etc/bashrc" perlbrew install perl-5.14.4 perlbrew switch perl-5.14.4 perlbrew install-cpanm cpanm XML/Simple.pm
Run as a non-root user.
Installing (build) process took about 10min for my environment.
You can also use "aptitude" instead of "apt-get".
For perlbrew, you can use "use" instead of "switch" to set-up only for current shell.
You may need to install other required modules using cpanm.
Comment
Latest Articles
Collapse
-
by seqadmin
In recent years, precision medicine has become a major focus for researchers and healthcare professionals. This approach offers personalized treatment and wellness plans by utilizing insights from each person's unique biology and lifestyle to deliver more effective care. Its advancement relies on innovative technologies that enable a deeper understanding of individual variability. In a joint documentary with our colleagues at Biocompare, we examined the foundational principles of precision...-
Channel: Articles
01-27-2025, 07:46 AM -
ad_right_rmr
Collapse
News
Collapse
Topics | Statistics | Last Post | ||
---|---|---|---|---|
Genetic Mapping of Plasmodium knowlesi Identifies Essential Genes and Drug Resistance Mechanisms
by seqadmin
Started by seqadmin, Today, 09:30 AM
|
0 responses
14 views
0 likes
|
Last Post
by seqadmin
Today, 09:30 AM
|
||
Started by seqadmin, 02-05-2025, 10:34 AM
|
0 responses
22 views
0 likes
|
Last Post
by seqadmin
02-05-2025, 10:34 AM
|
||
Started by seqadmin, 02-03-2025, 09:07 AM
|
0 responses
25 views
0 likes
|
Last Post
by seqadmin
02-03-2025, 09:07 AM
|
||
Started by seqadmin, 01-31-2025, 08:31 AM
|
0 responses
33 views
0 likes
|
Last Post
by seqadmin
01-31-2025, 08:31 AM
|
Comment