Unconfigured Ad
Collapse
X
-
It will depend on which Galaxy installation you are using (e.g. the main http://usegalaxy.org Penn State one), and how busy it is with other people's work. If you asked on the Galaxy mailing list you'd probably get a better answer.
-
I am new to NGS and bioinformatics. I just got my data and am trying out Galaxy. I am trying to use Fastq Groomer to convert into fastq-sanger. I have 8GB's of data, does anyone know an estimate of how long this process should take? I don't know whether to quit and execute again, it has been running for about 3.5 hours. Am I being impatient?
Sorry for the novice/inexperienced question
Thanks
nsl
Leave a comment:
-
My bad, sorry. Anyway, as suggested by 'patch' error, you should use a different strip:
That should work.Code:$ patch -p0 < / path/to/patch
HTH
D
Leave a comment:
-
BWA Illumina Quality Patch
Hi dawe,
I just tried to apply your SVN v50 patch to the current svn download, which lists version 50, and the patch fails.
Steps:Code:$ patch -p1 < bwa-svn-r50_illumina-qual.patch missing header for unified diff at line 5 of patch can't find file to patch at input line 5 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |Index: bwape.c |=================================================================== |--- bwape.c (revision 50) |+++ bwape.c (working copy) -------------------------- File to patch:
1) svn download of current bio-bwa subversion (version 50)
2) cd bio-bwa/trunk/bwaCode:svn co https://bio-bwa.svn.sourceforge.net/svnroot/bio-bwa bio-bwa .... bunch of stuff .... Checked out revision 50.
3) make
4) copied patch to current directory
5) attempted to patch as noted above
I tried the archived bwa-0.5.8 patch and that applied perfectly
Any suggestions?
PS - thanks for this patch and the previous maq ill2sanger patch they are life savers.
Leave a comment:
-
Could you successfully apply the patch? If yes, well, try to issueOriginally posted by zeam View PostI'm sorry I don't unstand your reply.Would you give me some explicit directions.Thanks very much!
I followed the directions:
cd bwa-source-directory
patch -p1 < patch.file
make
and see if the -I options appear. If yes, substitute the installed binary with this, i.e.Code:./bwa aln
dCode:sudo install bwa `which bwa`
Leave a comment:
-
Questions on BWA patch
I'm sorry I don't unstand your reply.Would you give me some explicit directions.Thanks very much!Originally posted by dawe View PostIt appears you haven't applied the patch (or you haven't installed the patched binary).
d
I followed the directions:
cd bwa-source-directory
patch -p1 < patch.file
make
Leave a comment:
-
It appears you haven't applied the patch (or you haven't installed the patched binary).
d
Leave a comment:
-
Questions on '-I' option
I have used patch to update my bwa.I followed you directions.But I don't know how to use the the "-I",and I have browsed your patch file and saw " -I Input files are in Illumina quallity scale." Meanwhile,when I type bwa aln after I used your patch file,I thought I would see the "-I" option ,but I didn't.Originally posted by dawe View PostYou may try to patch latest bwa version with the appropriate patch listed
here. It is the first one. It adds a '-I' option to 'bwa aln' predicate so that one can use Illumina (pipeline 1.3+ or 1.5+) fastq and trim as they were in sanger scale. Output in the SAM file is in Sanger scale as well.
d
So,can you give me some explanations?Supposed I will use Sanger quality 15,how to set -q INT after I used your patch.Shoud I set 15 or not?
I really appreciate of you threads and sorry for bothering.
bioinformatics@localhost bwa-0.5.8a]$ bwa aln
Usage: bwa aln [options] <prefix> <in.fq>
Options: -n NUM max #diff (int) or missing prob under 0.02 err rate (float)
[0.04]
-o INT maximum number or fraction of gap opens [1]
-e INT maximum number of gap extensions, -1 for disabling long
gaps [-1]
-i INT do not put an indel within INT bp towards the ends [5]
-d INT maximum occurrences for extending a long deletion [10]
-l INT seed length [32]
-k INT maximum differences in the seed [2]
-m INT maximum entries in the queue [2000000]
-t INT number of threads [1]
-M INT mismatch penalty [3]
-O INT gap open penalty [11]
-E INT gap extension penalty [4]
-R INT stop searching when there are >INT equally best hits [30]
-q INT quality threshold for read trimming down to 35bp [0]
-c input sequences are in the color space
-L log-scaled gap penalty for long deletions
-N non-iterative mode: search for all n-difference hits
(slooow)
-f FILE file to write output to instead of stdout
Leave a comment:
-
Hey, Galaxy has a tool called FASTQ Groomer under NGS: QC and manipulation menu.
you can convert bw various quality format (sanger, solexa, Illumina 1.3 and above, colorspace sanger).
I think you can also download the script directly from the website ...
NT
Leave a comment:
-
You may try to patch latest bwa version with the appropriate patch listedOriginally posted by zouzou View PostHi everybody !
Do you know if there is a software to convert illumina v1.5 fastq to sanger-fastq? Or do you know the code to do this ?
Thanks !
here. It is the first one. It adds a '-I' option to 'bwa aln' predicate so that one can use Illumina (pipeline 1.3+ or 1.5+) fastq and trim as they were in sanger scale. Output in the SAM file is in Sanger scale as well.
d
Leave a comment:
-
Also, bfast comes with a perl script to perform the conversion. It's under scripts (ill2fastq.pl).Originally posted by zouzou View PostHi everybody !
I am a very new user of new generation sequncing. I download the software BWA and SAMtools to analyse data of a illumina GA 2. I saw that BWA need .fastq format in input for the reads. I have data in qseq.txt format.
I saw that .txt and .fastq can be the same thing but there are variants in .fastq. I read BWA needs sanger-fastq and i think i have illumina v1.5-fastq.
Do you know if there is a software to convert illumina v1.5 fastq to sanger-fastq? Or do you know the code to do this ?
Thanks !
Leave a comment:
-
You can use several existing tools to do the conversion from Illumina FASTQ to Sanger FASTQ, including EMBOSS seqret, Biopython, BioPerl, BioJava, BioRuby etc.Originally posted by zouzou View PostDo you know if there is a software to convert illumina v1.5 fastq to sanger-fastq? Or do you know the code to do this ?
Thanks !
http://dx.doi.org/10.1093/nar/gkp1137
Note in recent pipelines Illumina FASTQ files some of the low quality scores have special meaning:
Leave a comment:
-
See https://www.seqanswers.com/node/4344 for a short perl script that converts .qseq.txt to a sangr-fastq file. The quality value conversion is actually done by this line:
It's fairly easy to convert this into a quick-and-dirty perl script that will do the same thing for a fastq file:Code:$q_line =~ tr/\x40-\xff\x00-\x3f/\x21-\xe0\x21/;
N.B.: The script above assumes that the sequence and quality values in the fastq file are on single lines. This is not necessarily true, but you can usually get away with it for short read data. You should check the output carefully, to make sure that it is doing what you want. It should be fairly obvious if it gets out of synchronization, or if you run it on a sanger-fastq file by mistake.Code:#!/usr/bin/perl use strict; use warnings; my $count = 0; while (<>) { chomp; if ($count++ % 4 == 3) { tr/\x40-\xff\x00-\x3f/\x21-\xe0\x21/; } print "$_\n"; }
Leave a comment:
-
Convert illumina v1.5 fastq to sanger fastq
Hi everybody !
I am a very new user of new generation sequncing. I download the software BWA and SAMtools to analyse data of a illumina GA 2. I saw that BWA need .fastq format in input for the reads. I have data in qseq.txt format.
I saw that .txt and .fastq can be the same thing but there are variants in .fastq. I read BWA needs sanger-fastq and i think i have illumina v1.5-fastq.
Do you know if there is a software to convert illumina v1.5 fastq to sanger-fastq? Or do you know the code to do this ?
Thanks !
Latest Articles
Collapse
-
by SEQadmin2
NGS has revolutionized clinical microbiology by offering new ways to identify and surveil pathogens without prior knowledge of the target. One popular approach is 16S rRNA and ITS amplicon sequencing, which targets specific microbial markers. But studies are increasingly incorporating shotgun metagenomics, a technique that sequences all DNA from a sample without targeting specific microbial markers. This approach allows more detailed taxonomic classification,...-
Channel: Articles
10-30-2026, 06:46 AM -
ad_right_rmr
Collapse
News
Collapse
| Topics | Statistics | Last Post | ||
|---|---|---|---|---|
|
Started by SEQadmin2, 11-17-2026, 06:27 AM
|
0 responses
24 views
0 reactions
|
Last Post
by SEQadmin2
11-17-2026, 06:27 AM
|
||
|
Started by SEQadmin2, 11-12-2026, 07:59 AM
|
0 responses
39 views
0 reactions
|
Last Post
by SEQadmin2
11-12-2026, 07:59 AM
|
||
|
Started by SEQadmin2, 11-05-2026, 09:25 AM
|
0 responses
50 views
0 reactions
|
Last Post
by SEQadmin2
11-05-2026, 09:25 AM
|
||
|
Started by SEQadmin2, 11-03-2026, 11:54 AM
|
0 responses
79 views
0 reactions
|
Last Post
by SEQadmin2
11-03-2026, 11:54 AM
|
Leave a comment: