The VM works well too, haven't tried the docker container yet.
One word on whole genomes - every contig or scaffold set has been fine so far, but running it on whole genomes with long chromosomes has failed repeatedly.
Should long chromosomes be split into arbitrary scaffolds ?
Seqanswers Leaderboard Ad
Collapse
Announcement
Collapse
No announcement yet.
X
-
So the environment variable didn't help with the problem . ( although the command would run if I put it on the command line ).
Luckily the docker container approach comes configured. Don't waste time trying to get this installed on your system... just use the docker container -- then it is just a 1 liner
Leave a comment:
-
As time marches along, there will only ever be more problems like this because CEGMA has been locked in development using some older versions of tools. As people install newer versions of things like HMMER and genewise (well, maybe that's not a tool that will be updated much either), things are likely to break.
If we ever get new funding, we have many plans for a completely new version of CEGMA, but without money we can't spend any more time on it unfortunately.
Regards,
Keith
Leave a comment:
-
memo to self -- RTFFAQ
The FAQ talks about this being due to a
genewise ocnfig being installed incorrectly.
I installed wise on an ubuntu container with apt-get
this should fix the problem in my running container:
export WISECONFIGDIR=/usr/share/wise
and this should fix it in my Dockerfile:
ENV WISECONFIGDIR /usr/share/wise
Maybe this is the root of some of the other problems.
Leave a comment:
-
crashing on 2.5
I have Cegma 2.5 freshly installed and I am getting similar errors:
Would love to be able to run the software....
********************************************************************************
** MAKING INITIAL GENE PREDICTIONS FOR CORE GENES (GENEWISE + GENEID) **
********************************************************************************
RUNNING: local_map -n local -f -h /build/CEGMA_v2.5/data/hmm_profiles -i KOG genome.chunks.fa 2>/out/S376-cegma.cegma.errors
FATAL ERROR when running local map 6400: "No such file or directory"
Ending CEGMA
In my .cegma.errors file it says this:
Warning Error
Unable to open gene.stat as gene stats file
Warning Error
Could not read gene statistics in gene.stat
Warning Error
Could not open BLOSUM62.bla as a filename for read Blast matrix
Warning Error
Could not open file codon.table as codon table file
Warning Error
Could not read codon table file in codon.table
Fatal Error
Could not build objects!
Can't run genewise -splice_gtag -quiet -gff -pretty -alb -hmmer /build/CEGMA_v2.5/data/hmm_profiles/KOG0002.hmm /tmp/genomic18349.fa > /tmp/genewise18349
Leave a comment:
-
Yes, I did think of that. But I have now been able to get 99% hits on a dataset that crashes against the Anopholes core genes. It seems like there should be some hits there (I am working with a wasp)....
I have continued to play my two (fasta, nucleotide) datasets and have managed to successfully run one against the core genes and the other against the Anopholes core genes. This is good enough for now, but a bit frustrating as I wanted to compare them....
If anyone comes across this and has a solution, it would still be useful for me in the future (and perhaps other people hitting this snag)
Leave a comment:
-
Does the output before this stage imply that you have no core genes? I.e. sometimes when you run CEGMA, the initial BLAST step might only find a small number of core genes. Each successive filtering step of CEGMA typically throws out more candidate core genes and you can end up with none at all. Some of the code might not handle this gracefully.
Leave a comment:
-
Hi all,
This is an old thread, but I'm getting a similar error with CEGMA v2.5. It's not happening all the time - I ran the test data just fine, the test proteins against my data ok, and my data against the Anopholes data ok. But my data against the Core proteins (instead of the 248 Anopholes ones) crashes.
Is anyone else having this problem?
Here are the last few lines:
********************************************************************************
** ACCURATE LOCAL MAPPING **
********************************************************************************
RUNNING: local_map -n local_self -g local.genewise.gff -d geneid_params/self.param -h /media/data/programs/CEGMA_v2.5/data/hmm_profiles -i KOG genome.chunks.fa 2>../annot_core/annot_core.cegma.errors
NOTE: Will use specifed local.genewise.gff file instead of running genewise
FATAL ERROR when running local map 6400: "No such file or directory"
Ending CEGMA
#############
Thanks,
Alice
Leave a comment:
-
Problem when using CEGMA
Originally posted by flobpf View PostActually, CEGMA's most recent version did just fine. My problem was resolved thanks to the deft bug-fixing by the CEGMA group.
I encountered the same problem as you when using CEGMA. The error is as follows:
Warning Error
Major problem (!) - in GeneLoop6 matrix to special read off, position
0,0 state 0 no source found!
Warning Error
In GeneLoop6 read off ending at 0 ... got a bad matrix to special
read off... returning partial alignment
Can't use an undefined value as an ARRAY reference at /state/partition1/home/xuchao/software/cegma_v2.3.190711/bin/parsewise line 217.
Can't run parsewise
You seem to have solved this problem! Could you tell me how?
Leave a comment:
-
Actually, CEGMA's most recent version did just fine. My problem was resolved thanks to the deft bug-fixing by the CEGMA group.
Leave a comment:
-
CEGMA error
Hi,
I've been trying to run CEGMA on my 280MB genome. It does run fine on all other genomes I've got, but it refuses to run on my genome. It keeps giving the following error:
Code:RUNNING: local_map -n local -f -h /opt/cus/CEGMA/2.3--GCC-4.1.2/data/hmm_profile s -i KOG -v genome.chunks.fa 2>sample.cegma.errors FATAL ERROR! 6400: "No such file or directory" In sample.cegma.errors Warning Error In GeneLoop6 matrix special read off - out of bounds on matrix [i,j is 193,-1 state 0 in standard matrix] Warning Error Problem - hit bad read off system, exiting now Can't use an undefined value as an ARRAY reference at /opt/cus/CEGMA/2.3--GCC-4. 1.2/bin/parsewise line 217. Can't run parsewise
I wonder if anyone has encountered anything like this? If yes, how did you solve it, if at all?
Thanks
Latest Articles
Collapse
-
by seqadmin
The complexity of cancer is clearly demonstrated in the diverse ecosystem of the tumor microenvironment (TME). The TME is made up of numerous cell types and its development begins with the changes that happen during oncogenesis. “Genomic mutations, copy number changes, epigenetic alterations, and alternative gene expression occur to varying degrees within the affected tumor cells,” explained Andrea O’Hara, Ph.D., Strategic Technical Specialist at Azenta. “As...-
Channel: Articles
07-08-2024, 03:19 PM -
ad_right_rmr
Collapse
News
Collapse
Topics | Statistics | Last Post | ||
---|---|---|---|---|
Started by seqadmin, Yesterday, 06:46 AM
|
0 responses
9 views
0 likes
|
Last Post
by seqadmin
Yesterday, 06:46 AM
|
||
Started by seqadmin, 07-24-2024, 11:09 AM
|
0 responses
26 views
0 likes
|
Last Post
by seqadmin
07-24-2024, 11:09 AM
|
||
Started by seqadmin, 07-19-2024, 07:20 AM
|
0 responses
160 views
0 likes
|
Last Post
by seqadmin
07-19-2024, 07:20 AM
|
||
Started by seqadmin, 07-16-2024, 05:49 AM
|
0 responses
127 views
0 likes
|
Last Post
by seqadmin
07-16-2024, 05:49 AM
|
Leave a comment: